Core Dynamics
RG-max: 2.522
RG-min: 2.480
RG-diff.: 0.042
Average RG: 3.0 of 10
Coverstock PlaZma Reactive Solid
Color: Black / Blue / Purple
Hardness: 74-76
Factory Finish 600 – Wet Sand
Performance
Hook Potential: 175
Length: 45
Typical Breakpoint Shape: 70
Comparison Chart Position: T 11
MaxXX Zone, the ball to go to when you’re looking for the Max. Maximum Hook, Maximum Traction, Maximum Performance even on oily lanes, that’s what the new MaxXX Zone will bring to your arsenal.
Core
The MaxXX Zone core uses the same inner core shape as the Smash Zone. However, the weight distribution between the inner core and outer core has been adjusted to raise the overall RG, so even with its aggressive PlaZma coverstock, the MaxXX Zone will clear the fronts and provide maximum traction in the mid and the back-ends even on the tightest lane conditions.
Coverstock
To maximize the performance of the MaxXX Zone, Brunswick has developed the new PlaZma coverstock. PlaZma sticks to the lane and continues to traction strong when other coverstocks break loose from the lane. When combined with the MaxXX Zone core this gives an unbeatable combination to attack the oiliest lane conditions and provide unparalleled lane hugging traction and recovery.
Reaction Characteristics
Out of the Box: With its 600-grit wet sand surface, the MaxXX Zone will match-up well on medium to oily lane conditions for most bowlers and will be a good all around ball for bowlers with higher ball speed or lower rev rates.
If your MaxXX Zone goes too long: The 600-wet sand out of the box finish can be adjusted to 400 or 220-wet sand if you need to get the MaxXX Zone to read the lane sooner.
If your MaxXX Zone hooks too early: The MaxXX Zone has an aggressive surface preparation out of the box. By smoothing out the surface finish with progressively less aggressive finishes you will be able to move the reaction further down the lane.